Table of Contents
Advertisement
GS920 Series Gigabit Ehternet Switch Installation and User's Guide
Installing the Switch on a Wall
Guidelines for
Installing the
Switch on a Wall
Items Need for
Wall Installation
The AT-GS920 switches can be mounted on a wall.
Before planning to install the switch on a wall, review the following
guidelines:
To install the AT-GS920/8PS switch, you must purchase the
AT-BRKT-J24 wall mount kit.
Note
To install the AT-GS920/8PS switch on a wall, see "Installing the
AT-GS920/8PS Switch on a Wall" on page 68.
To install the AT-GS920/24 switch, use the brackets included in
the shipping box in all locations except in Japan where you must
purchase the AT-BRKT-J22 Wall Mount Kit separately.
To install the AT-GS920/16 or AT-GS920/8 switch, you must
purchase the AT-BRKT-J23 wall mount brackets separately.
Any of the AT-GS920 switch models can be mounted on the wall
with the front panel facing left, right, up or down.
Before you begin to install the switch, review "Reviewing Safety
Precautions" on page 32.
You need the following items to install the switch on a wall:
A switch
One pair of brackets (For more information, see "Guidelines for
Installing the Switch on a Wall".)
Four screws to attach the brackets to a wall
Four plastic anchors for the screws
Phillips-head screwdriver
Pencil
Note
The screws, plastic anchors, Phillip-head screwdriver and pencil are
not included in the shipping box. You must provide these items.
44
Advertisement
Table of Contents
