Restoring The Default Ntp Configuration; Ntp Output Timescale - Spectracom VersaSync User Manual

2.7 Configuring Network Settings
2.7.8.5

Restoring the Default NTP Configuration

The VersaSync default NTP configuration can be restored at any time. It comprises basic set-
tings such as Stratum 1 operation with no other servers or peers, no broadcasting and no
access restrictions. External queries or modifications are not permitted, while generally all IPv4
and IPv6 client connections are allowed.
To restore VersaSync to its default NTP configuration:
1.
Navigate to MANAGEMENT > NETWORK: NTP Setup .
2.
In the NTP Actions panel, click Restore Default NTP Configuration .
3.
In the dialog window that displays, click OK .
2.7.8.6

NTP Output Timescale

You can choose the timescale VersaSync will use for the time stamps it sends out to its NTP cli-
ents and network nodes. This is done by setting VersaSync System Time timescale. The options
are UTC, TAI and GPS. Typically, UTC is used for network synchronization.
82
You can search any of the fields for specific information in the Search field at the
top of the window.
A limit of 10 entries will appear on the screen at any one time. If you have more
than 10 clients, you can move through the table using the First , Previous , Next and
Last navigation buttons at the bottom of the screen.
CHAPTER •
2 VersaSync User Manual Rev. 6.0