Configuring The Oscillator - Spectracom VersaSync User Manual

3.4 Managing the Oscillator
Figure 3-2:
The Oscillators Settings page provides the user with some control of the disciplining process.
This page is also used to configure the length of time VersaSync is allowed to remain in the Hol-
dover mode when all references are lost.
3.4.1

Configuring the Oscillator

VersaSync is equipped with an internal oscillator. To configure the oscillator settings:
1.
Navigate to MANAGEMENT > OTHER: Disciplining .
2.
Click the GEAR icon at the top of the Status panel. The Oscillators Settings window will dis-
play:
172
Host disciplining
Note: Host disciplining is NOT supported by VersaSync units that are equipped
with a Rubidium oscillator.
CHAPTER •
3 VersaSync User Manual Rev. 6.0