Spectracom VersaSync User Manual page 257

Command
routes4
routes6
rt4add
rt4del
rt4get
rt6add
rt6del
rt6get
saveconf
savelog
scaleget
scaleset
services
servget
servset
slaacget
slaacset
stateset
status
syncstate
sysupgrade
testevent
tfomget
timeget
timeset
VersaSync User Manual
Displays the current IPv4 routing table(s)
Displays the current IPv6 routing table(s)
Adds an IPv4 static route
Deletes an IPv4 static route
Displays the configured IPv4 static routes
Adds an IPv6 static route
Deletes an IPv6 static route
Displays the configured IPv6 static routes
Generate archive of current configuration
Generate archive of all log files
Displays configured system timescale
Used to configure the system timescale
Displays the state of services (enabled/disabled)
Displays the state of individual services
Enable or disable specific services
Displays whether SLAAC is enabled
Used to enable or disable SLAAC
Enable or disable an entry in the reference priority table. index = 0...15. state = 0 (dis-
able), 1 (enable)
Displays information about the oscillator disciplining
Display timing system synchronization state
Performs system upgrade using the update bundle provided
Generates SNMP events in the enterprise MIB
Displays current estimated system time error (TFOM – Time Figure of Merit)
Displays current system time (time is displayed in the configured timescale – See
command to retrieve the configured timescale)
scaleget
Used to manually set the current time (hours, minutes in seconds); time is entered based
on the configured timescale – See
timescale
Description
command to retrieve the configured
scaleget
APPENDIX
245