Restoring The Default Ntp Configuration; Ntp Output Timescale - Spectracom PRISMA VelaSync User Manual

2.10 Configuring NTP
2.10.5 Restoring the Default NTP Configuration
The VelaSync default NTP configuration can be restored at any time. It comprises basic settings
such as Stratum 1 operation with no other servers or peers, no broadcasting and no access
restrictions. External queries or modifications are not permitted, while generally all IPv4 and
IPv6 client connections are allowed.
To restore VelaSync to its default NTP configuration:
1.
Navigate to MANAGEMENT > NETWORK: NTP Setup .
2.
In the NTP Actions panel, click Restore Default NTP Configuration .
3.
In the dialog window that displays, click OK .
2.10.6 NTP Output Timescale
You can choose the timescale VelaSync will use for the time stamps it sends out to its NTP clients
and network nodes. This is done by setting VelaSync System Time timescale. The options are
UTC, TAI and GPS. Typically, UTC is used for network synchronization.
68
You can search any of the fields for specific information in the Search field at the
top of the window.
A limit of 10 entries will appear on the screen at any one time. If you have more
than 10 clients, you can move through the table using the First , Previous , Next and
Last navigation buttons at the bottom of the screen.
CHAPTER •
2 VelaSync User's Manual Rev. 1