Spectracom VersaSync User Manual page 210

4.5 Miscellanous Typical Configuration Tasks
Figure 4-1:
To configure a login banner:
1.
Navigate to the MANAGEMENT > Network Setup screen.
2.
In the Actions panel on the left, click Login Banner .
3.
The Network Access Banner window will display. Check the box Enable Custom Banner .
4.
In the Plain Text Banner text box, type in your custom text.
5.
Optionally, you may also use the
198
Login banner (example)
Note: The Plain Text Banner
login interfaces (Web UI, telnet, SSH, FTP, SFTP, serial, etc.). It is not
required to include HTML tags.
Note: Enabling and using the
to apply HTML formatting tags to your message (e.g.,
is used to create a message for all interactive
Web Interface Banner text box.
Web Interface Banner
CHAPTER •
4
text box will allow you
colors ). Note that this
VersaSync User Manual Rev. 6.0