Configuring Network Settings - Spectracom VersaSync User Manual

2.7 Configuring Network Settings
2.7

Configuring Network Settings

Before configuring the network settings, you need to setup access to VersaSync web user inter-
face ("Web UI"). This can be done by assigning a static IP address, or using a DHCP address.
For more information, see "Assigning a Static IP Address" on page 33.
Once you have assigned the IP address, login to the Web UI. For more information, see
"Accessing the Web UI" on page 31.
To configure network settings, or monitor your network, navigate to VersaSync's Network Setup
screen.
To access the Network Setup screen:
Navigate to MANAGEMENT > Network Setup . The Network Setup screen is divided into
three panels
The
54
:
Actions panel provides:
General Settings : Allows quick access to the primary network settings necessary to
connect VersaSync to a network. See "General Network Settings" on the facing
page.
Web Interface Settings :
Web interface timeout : Determines how long a user can stay logged on.
For more information, see "Web UI Timeout" on page 197.
Access Control : Allows the configuration of access restrictions from assigned net-
works/nodes.
Login Banner : Allows the administrator to configure a custom banner message to
be displayed on the VersaSync Web UI login page and the CLI (Note: There is a
2000 character size limit).
SSH : This button takes you to the SSH Setup window. For details on setting up
SSH, see "SSH" on page 59.
CHAPTER •
2 VersaSync User Manual Rev. 6.0