Spectracom VersaSync User Manual page 104

2.7 Configuring Network Settings
4.
Enter the required information into the fields:
92
Host : The IP address for the server to be used as host.
Min Poll Interval : Select a value from the drop down (the default is 3 (8s).
Max Poll Interval : Select a value from the drop down (the default is 3 (8s).
For both NTP Peers, and NTP Servers the Minimum and Maximum Poll rate for
NTP packets can be configured.
Enable Symmetric Key : Click the checkbox to enable/disable Symmetric Key. See
also: "Configuring NTP Symmetric Keys" on page 98.
Note: Before you can edit the
Keys through the
on page 98. Conversely, you may check the
Key field.
Enable Autokey : Click the check box to enable/disable Autokey. See "NTP
Autokey" on the facing page for more information on Autokey.
Note: When you configure NTP Autokey, you must first disable the
NTP service in the NTP Services panel, then re- enable it after
Autokey configuration is completed.
Mark as Preferred : Check this box to prefer this NTP Peer over other NTP Peers
("NTP Peer Preference"). This will result in VersaSync synchronizing more fre-
quently with this Peer. For additional information on NTP Preferences, see
Key field, you must set up
Actions Panel. See "NTP: Symmetric Keys (MD5) "
CHAPTER •
2 VersaSync User Manual Rev. 6.0
Symmetric
box below the
Autokey