Restoring The Factory Defaults; Cleaning The Configuration Files And Halting The System - Spectracom VersaSync User Manual

3.
4.8.2.5

Restoring the Factory Defaults

For instructions on how to restore the VersaSync's configuration files to their factory default set-
tings see "Resetting All Configurations to their Factory Defaults" on page 224.
4.8.3

Cleaning the Configuration Files and Halting the System

The "Clean and Halt" procedure restores the configuration files to their factory defaults and
then immediately halts the system, so as to prevent any changes from being applied to the fact-
ory default condition.
To perform a "Clean and Halt":
1.
2.
CHAPTER •
4 VersaSync User Manual Rev. 6.0
Click OK in the grey confirmation window. The system will restore the configuration
using the bundled file stored at
/home/spectracom/xfer/config/
read the new configuration file. Once powered back up, VersaSync will be configured
with the previously stored file.
Navigate to TOOLS > SYSTEM: Upgrade/Backup .
In the Actions panel, click * Clean Configuration and Halt * .
4.8 Resetting the Unit to Factory Configuration
VersaSync , then reboot in order to
.conf
229