Spectracom VersaSync User Manual page 84

2.7 Configuring Network Settings
Creating Users
1.
Navigate to MANAGEMENT > NETWORK: SNMP Setup .
2.
In the SNMP V3 panel, click the PLUS icon in the top-right corner.
3.
The SNMP V3 Settings window will display.
4.
Enter the required information in the fields provided.
5.
Click Submit . The created user will appear in the SNMP V3 panel:
72
SNMP User Names and passwords are independent of users that are configured
on the Tools/Users page.
User names are arbitrary. SNMP User Names should be between 1 and 31
characters in length.
The User Name must be the same on VersaSync and on the management
station.
The Auth Type field provides a choice between MD5 and SHA.
The Auth Password must be between 8 and 32 characters in length.
The Priv Type field provides a choice between AES and DES.
The Priv Passphrase must be between 8 and 32 characters in length.
The Permissions field provides a choice between Read/Write and Read Only.
CHAPTER •
2 VersaSync User Manual Rev. 6.0