Subnet Mask Values - Spectracom VersaSync User Manual

2.5 Setting up an IP Address
5.
To verify that the address has been accepted, enter the static IP address into the address
field of the browser and log into the Web UI again.
6.
If so required, turn DHCP back on (cf. Step 3), or continue with your configuration; see:
"Configuring Network Settings" on page 54.
2.5.2

Subnet Mask Values

Table 2-1:
Network Bits Equivalent Netmask Network Bits Equivalent Netmask
30
29
28
27
26
25
24
34
Subnet mask values
255.255.255.252 18
255.255.255.248 17
255.255.255.240 16
255.255.255.224 15
255.255.255.192 14
255.255.255.128 13
255.255.255.0 12
255.255.192.0
255.255.128.0
255.255.0.0
255.254.0.0
255.252.0.0
255.248.0.0
255.240.0.0
CHAPTER •
2 VersaSync User Manual Rev. 6.0