Cli Commands - Spectracom VersaSync User Manual

Procedure:
1.
Connect the personal computer to the USB interface.
2.
Configure your terminal emulation program, using the following settings:
3.
Depending on which network protocol you are using (SSH, Telnet), you will need to
enter authentication upon establishment of the connection either in a separate authen-
tication window, or the Terminal window: The default user name is
password
4.
Using the Terminal window, you can now submit commands.
5.2.2 CLI Commands
VersaSync features a suite of command-line interface (CLI) commands that can be used to con-
figure parameters and retrieve status information or log files via a remote connection, using the
or
telnet
This section includes a list of some of the supported commands.
VersaSync User Manual
Port : COM1
Bits per second : 115200
Data bits : 8
Parity : None
Stop bits : 1
Flow control : None
.
admin123
(if enabled) protocol.
ssh
APPENDIX
, and the
spadmin
241