Spectracom VersaSync User Manual page 256

APPENDIX
Command
localset
model
net
netnum
net4
net6
options
oscget
portget
portset
portstate
ppsctrl
priorset
radius setretry
radius getretry
radius server list
radius server add
radius server del
reboot
reftable
release4
release6
renew4
renew6
resetpw
244
Used to configure local clocks
Displays the Serial Number of the unit
Displays network status
Displays the number of general-purpose network interfaces
Displays IPv4 network status
Displays IPv6 network status
Displays configured options installed (if any)
Displays the installed system oscillator
Display whether network port is enabled (for example, "portget ETH2")
Enable or disable a network port:
"portset x on" where "x" is the port number (for example, "ETH2")
"portset X off"
[NOTE: Available since Web UI Revision no. 5.1.2]
Display the current state for a network port
Enable/disable individual 1PPS output signals
Sets the priority of an entry in the reference priority table
<value> Sets how many radius login retries will be attempted
<value> Gets the number of radius login retry attempts
Lists radius servers
<host> <port> <key> <timeout>
Adds radius server
<id> Deletes radius server number <id>
Used to warm-boot the unit without having to disconnect or reconnect power
Displays reference priority table
Used with DHCP to release the IPv4 address
Used with DHCPv6 to release the IPv6 address
Used with DHCP to renew the assigned IPv4 address
Used with DHCPv6 to renew the assigned IPv6 address
Resets the administrator account (spadmin) password back to the default value
" admin123 "
Description
VersaSync User Manual