Configuring System Settings; Figure 5.2 Configuration Screen (Example) - Procleix TIGRIS Operator's Manual

S 5
ECTION

Configuring System Settings

Use the Configuration tab on the Configuration screen to change the options for the system.
Use this screen to do the following:
♦
Manage basic system configuration.
♦
Check the PROCLEIX
♦
Define custom control samples.
♦
Define site information.
♦
Define tube barcode configuration.
♦
Set the export location for results and logs.
♦
Set the system's date and time.
♦
Start and stop LIS Control (transmission).
♦
Monitor the UPS connection status – Green indicates the UPS is connected and Red
indicates the UPS is not connected.
The system must be in Standby mode to access the system settings on the Configuration tab.
Note: An operator must have "Maintenance – Software Setup" rights to configure the
software.
5-4
Part # 902649EN Rev. A

Figure 5.2 Configuration Screen (Example)

®
TIGRIS System version being used.
®
PROCLEIX TIGRIS System Operator's Manual
Volume I: Operating the Instrument