S
3. R
ECTION
Using A Worklist
The System uses worklists to manage its processing runs. Use the Worklist Manager screen to
create and manage the worklists.
To access the Worklist Manager, select the Worklists tab on the right side of the Main Menu
screen.
Samples cannot be run until a worklist is created for them. The system then automatically
populates the worklist when the sample barcodes on its carousel are scanned.
®
PROCLEIX
TIGRIS System Operator's Manual
Volume I: Operating the Instrument
S
UNNING
AMPLES
Figure 3.1 Worklist Manager Screen
R
S
UNNING
AMPLES
3-1
Part # 902649EN Rev. A