Printing A Worklist; Deleting A Worklist - Procleix TIGRIS Operator's Manual

S 3
ECTION
If specimens are being deleted, a confirmation dialog box opens. Click OK to
confirm.
The Worklist Details grid in the Edit Carousel Worklist window updates to display
the new specimen count.
4. Use the Edit Tests... button to change the number of replicates for an individual specimen
in the worklist:
a) On the Worklist Details grid, select the specimen to be edited.
Note: The Edit Tests... button is disabled when a calibrator or PROCLEIX
TIGRIS Control is selected.
b) Click Edit Tests....
An Edit Tests window opens
c) Enter the new number of replicates.
d) Click OK.
5. Click OK to confirm.
6. When all of the changes in the Edit Carousel Worklist window are completed, click Done.
The Worklist Details grid on the Worklist Manager updates to display the new
information for the worklist and its samples.

Printing a Worklist

Use the Worklist Manager to print a worklist of tests. Use the printed worklist as a guide for
correct placement of calibrators, PROCLEIX
1. In the Stored Worklists grid, select the worklist to be printed.
2. At the bottom of the Worklist Detail box, click Print Worklist....
A print dialog box opens.
3. Make any necessary changes to the printer set-up.
4. Click OK.

Deleting a Worklist

Use the Worklist Manager to delete a stored worklist.
Note: A worklist must be de-queued before it can be deleted.
1. In the Stored Worklists grid, select the worklist to be deleted.
2. Click Delete Worklist.
A confirmation dialog box opens.
3. Click OK.
The system deletes the worklist from the PROCLEIX
removes it from the Stored Worklists grid.
Note: The ID number of the deleted worklist is not used again.
3-4
Part # 902649EN Rev. A
®
TIGRIS Controls, and specimens.
®
TIGRIS System database and
®
PROCLEIX
TIGRIS System Operator's Manual
Volume I: Operating the Instrument
®