Table 4.1 Worklist Detail Grid - Procleix TIGRIS Operator's Manual

S 4
ECTION
The Worklists grid on the upper right side of the Results screen displays the following
information about each worklist of the selected type:
♦
ID – Worklist ID
♦
Assay – Assay that was run
♦
Specimens – Number of specimens in the worklist
♦
Verified – Whether or not the worklist has been verified
♦
LIS State – Whether or not the worklist results have been saved to a Laboratory
Information System (LIS).
♦
Start Time – The starting date and time that the worklist was run.
The Worklist Details grid at the bottom of the screen displays the following information about
results for each sample in the worklist selected in the Worklists grid:
Field
Test No.
RackID-position
Sample ID
IC RLU
IC Interpretation
Analyte RLU
Analyte S/CO
Overall
Interpretation
Status
Rejected
Reasons
Type
Refer to the "Quality Control Procedures" and "Interpretation of Results" sections in the
appropriate assay package insert for information on results interpretation and the criteria used
to process results.
Note: The use of EQCs should be governed by site-specific standard operating procedures.
The PROCLEIX TIGRIS System will produce results independent of the EQC results.
4-2
Part # 902649EN Rev. A
Description
Sample position in the worklist.
Sample rack barcode and sample tube position in the rack.
Scanned or manually entered sample barcode.
Relative Light Units detected during DKA for Internal Control.
Valid or Invalid result for Internal Control.
Relative Light Units detected during DKA for the specific analyte detected.
The signal to cut off ratio for the specific analyte detected.
Reactive, NonReactive, Valid, Invalid or Suspect results for the specific
analyte detected.
System-generated codes applied to tests.
Whether or not the test result was rejected by an operator.
If applicable, operator reasons for rejecting the test result.
Sample type (e.g., calibrator, PROCLEIX TIGRIS Control, specimen, or
user control).

Table 4.1 Worklist Detail Grid

®
PROCLEIX TIGRIS System Operator's Manual
Volume I: Operating the Instrument