Status Codes; Searching For Worklists; Table 4.2 Common Status Codes - Procleix TIGRIS Operator's Manual

Status Codes

The system automatically assigns status codes to a sample result to signify why it has marked
a test as invalid or to relay other information related to that test. Table 4.2 displays some of the
more common Status codes that might occur. See "Appendix A. Status Codes" for a
comprehensive list of Instrument and Results processing codes.
Code Description
M Manually entered barcode ID
Magnetic wash station level-sense
ML
failure
MT Magnetic wash tip not picked up
Testing incomplete because the
NTI
processing run was stopped
P Assay processing error
Sample quantity not sufficient for
QNS
processing

Searching for Worklists

To find a worklist or worklists that fit specific criteria, search the worklists in the Worklists grid.
1. In the Worklists grid, click Search....
A Results Search window opens.
2. Choose search criteria as follows:
Note: All of the search fields are optional.
Note: To clear the secondary sort field, highlight the field and press Delete on the
keyboard.
♦
Run Date – the date range during which the worklists completed processing
♦
Assay – the assay performed on the worklist
♦ Sample ID – the barcode ID of a sample in the worklist
♦
Verification Status – whether the worklist was verified
♦
Transmission Status – whether the worklist results have been saved to a Laboratory
Information System (LIS)
3. Click OK.
The Worklists grid on the Results screen displays all worklists that fit the search criteria.
4. To return to the full list of completed worklists, click Show All.
®
PROCLEIX TIGRIS System Operator's Manual
Volume I: Operating the Instrument

Table 4.2 Common Status Codes

Code Description
Sample ID barcode manually
S
scanned
Sample processing aborted: sample
SPA
pipetting failure
VVFS Volume verification failure—Sample
VVFT Volume verification failure—TCR
Invalid result due to PROCLEIX
x
TIGRIS Control failure
M R
ANAGING ESULTS
4-3
Part # 902649EN Rev. A