Status Bar; Table 2.4 System Modes - Procleix TIGRIS Operator's Manual

S 2
ECTION

Status Bar

The Status Bar displays the system mode, current user, current system action, and the date/
time. Use the system mode to determine the availability of the system for certain activities.
Table 2.4 describes possible system modes.
Mode
Assay Processing
Data Access Only
Data Initialization
Error—Data
Access Only
Error—No Data
Access
Standby
2-4
Part # 902649EN Rev. A
Meaning
The system is processing a
worklist.
The system is busy, but some
software functions are
available.
The system and software are
initializing. The system is in
this state at start-up.
A system error has occurred.
The operator can manipulate
worklists and data in the
system.
A system error has occurred.
The operator cannot perform
any data access activities
except Send Logs.
The system is ready for
normal operation.

Table 2.4 System Modes

Occurrence
The system is in this mode as worklists
are queued for processing. This mode
continues through specimen pipetting,
assay processing, and results
processing.
The system is in this state during system
initialization, hardware reset, and during
unload and priming operations.
A progress bar is displayed during this
state and no program features or
functions are available.
The system is in this state if an error
occurs while the system is connecting to
the system, performing a hardware reset
or performing an unload operation.
The system is in this state if an error
occurs for any other reason than the
system connecting to the system,
performing a hardware reset or
performing an unload operation.
The system is in this state after the
system and software have been
initialized or have returned to an idle
state.
®
PROCLEIX TIGRIS System Operator's Manual
Volume I: Operating the Instrument