Playback Configuration; Manage Sessions - Keysight N9913A User Manual

Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)
SA Data Recording:
— Data can be recorded at the Raw Meas block where data is acquired after
— Data can be recorded from Traces 1,2,3, or 4 which includes the trace state
— Recording from a Clear/Write trace yields exactly the same data as
— Data is ALWAYS played back at the same location in the data flow: just after
— See an example using Record Playback with Max Hold traces in

Playback Configuration

By default, trace sweeps are played back as fast as the trace can be drawn on
the screen. The following setting allows you to slow playback. In addition, you
can manually scroll through individual traces using Playback Trace, or scroll
through State and User Tags using Playback State/Tag. Learn more in How to
Playback a Session in
To slow playback of a session:
— Record a new session or Open an existing session.
— Press
— Then
—
—
—

Manage Sessions

— Press Trace 6
— Then
Keysight N9927-90001 User's Guide
ResBW, VideoBW, and Detector processing, but before any trace state
processing.
(Max Hold, Min Hold, and so forth).
recording from the Raw Meas block.
the Raw Meas block, through all currently active Traces, and onto the
display.
Playback Example (SA Only)" on page
"How to Playback a Session" on page
Playback Configuration
Playback Interval
— Enter a value in seconds between 0 (no delay) and 100 using the
numeric keypad,
keypad, select a multiplier key. Learn about multiplier abbreviations.
— Press Enter
First Trace to define the first trace in a Range of traces to be
recorded/played/saved.
Last Trace to define the last trace in a Range of traces to be
recorded/played/saved.
Back to return to the previous menu.
Record Playback
284.
arrows, or the rotary knob. After using the
"Record
279.
283