Multi-Trace Configurations - Keysight N9913A User Manual

NA (Network Analyzer) Mode
NA Mode Settings

Multi-Trace Configurations

In NA Mode you can display multiple traces on the FieldFox screen.
The graphic above shows a x3H configuration. Tr2 is the ACTIVE trace as
indicated by the highlighted Tr2.
Trace Setting Notes
— The Frequency Range, IF BW, Resolution, Average, and Output Power
— All other trace settings, such as measurement, format, and limit lines, are
IMPORTANT! For CAT and NA modes, limit lines do not apply
where F1 = F2.
— By default, a marker is created on ALL traces. However, they can be created
Keysight N9927-90001 User's Guide
settings are common for all displayed traces.
applied individually to the ACTIVE trace in the same manner as when a
single trace is present.
individually by disabling Coupled Markers. Learn more in
(NA Mode)" on page 449.
"Coupled Markers
89