Fieldfox Setting Changes During Record And Playback - Keysight N9913A User Manual

RTSA (Real-Time Spectrum Analyzer) Mode—Option 350 (CPU2 Only)
Record/Playback (RTSA Option)
You can determine the length of time over which recording can occur by
setting the Record Interval (the time between recorded traces) and other
settings. Learn more in
To view and edit the maximum number of records
Just after opening or initiating a session...
— Press
— Then
—
IMPORTANT! Pressing Clear All Records causes a loss of ALL of the session
data.

FieldFox Setting Changes during Record and Playback

During Recording
When any of the following State settings are changed during recording, the
State counter is incremented
the settings are saved to the Session file along with the first trace to be
recorded with the new setting. During playback, the trace and display
annotation will reflect the change on the screen.
State settings:
Refer to
the RTSA options.
226
"Recording Configuration" on page
Session Data
TraceRecordLimit <n>
recorded).
Clear All Records Empties that session of recorded traces. Learn more in
"Manage Sessions" on page
Table 10-1 on page 227
(n = Max number of traces that can be
232.
("About State and User Tags" on page
for a list of the applicable state settings for
Keysight N9927-90001 User's Guide
230.
227) and