Honda Civic 1998 Service Manual page 982

Seat Gover Replacement
CAUTION: Wear glov€s to remove and install the seat
covels.
NOTE; Take care not to tear the seams or damage the seat
covers.
Soat-back cover removal:
2DI4D:
L
Remove the seat-back (see pages 20-79,81).
2 .
L o o s e n t h e s e a t - b a c k c o v e r b y r e l e a s i n g a l l t h e
c l r p s .
>: Clip locations
LEFT SEAT.BACK
COVER
RIGHT SEAT.BACK
COVER
3 . Pull back the edge of the seat-back cover all the way
around. then release the clips.
>: Clip locations
RIGHT
2 .
4.
Installation is the reverse ot the removal procedure.
NOTE:
. To prevent wrinkles when installing a seat cush-
ion cover, make sure the material is stretched
evenly over the pad before securing the clips.
. Replace the released clips with new ones.
3D:
' 1 .
Remove the seat-back (see page 20-80).
Loosen the seat-back cover by releasing allthe clips.
NOTE: Remove the lock knob, lock collar and latch
cover.
>: Clip locations
SEAT.BACK
COVER
3.
Pull back the edge of the seat-back cover all the way
around, then release the clips.
>: Clip locations
SEAT.BACK
COVER
4.
Installation is the reverse of the removal procedure.
NOTE:
. To prevent wrinkles when installing a seat-back
cover, make sure the material is stretched evenly
over the pad before securing the clips.
. Replace the released clips with new ones.
(cont'd)
20-83