Honda Civic 1998 Service Manual page 1360

t
From page 24-30
{ B )
OASHBOARD WIRE HARNESS
y;T7f;V4csoe
Llr.-L_v)fr
I
BLU
IYEL
wire.side of female
JUMPER WIRE
termlnals
W i r e s i d e o f f e m a l e
I e r m t n a t s
SRS MAIN HARNESS
,I8P CONNECTOR
DASHBOARD WIRE HARNESS
5P CONNECTOR
DASHBOARD WIRE HARNESS
Chock the SRS indicator circuit:
1. Turn the ignition switch OFF
2. Remove the gauge assemblY
NOTE: Do not disconnect the dashboard wire harness 5P
connector from the gauge assembly
3. Turn the ignition switch ON (ll).
4. Connect the dashboard wire harness 5P connector termi-
nals No. 1 and No 5 with a jumper wire.
Do.s the SRS indicator light go otff
Fsulty SRS indic.tor light circuit in the g.uge ts3embly;
replace the SRS printed circuil board in the gauge
Check to. a short to ground in rhe SRS indicator light cir-
cuit:
1. Turn the ignition switch OFF
2. Disconnect the dashboard wire harness 5P connector
from the gauge assembly
3. Check resistance between the No. 1 terminal ot the dash-
board wire harness 5P connector and ground. There should
be 1 Mo or more.
Check for an oDen in th6 SRS indicttor light circuit:
1. Check resistance between the No 6 terminal of the SRS
main harness 18P connector and No 1 terminal of the
dashboard wire harness 5P connector; there should be
0 - 1 . 0 0 .
7o page 24-32
W i r e s i d e o f f e m a l e t e r m i n a l s
(D)
To page 24-33
( E )
To page 24-33
{cont'd}
a.t
24-31