Honda Civic 1998 Service Manual page 1338

I
v
Wiring Precautions
.
Never attempt to modify, splice or repair SRS wiring
NOTE: SRS wiring can be identified by special yellow
outer Protective covering.
Be sure to install the harness wires so that they are not
Dinched or interfering with other parts.
v
M a k e s u r e a l l S R S g r o u n d l o c a t i o n s a r e c l e a n a n d
grounds are securely fastened for optimum metal-to-
metal contact. Poor grounding can cause intermittent
Droblems that are difficult to diagnose.
v
24-9
Backprobing SPring-loaded Lock
Connectors
. When checking voltage or resistance on this type of
connector the first time, it is necessary to remove the
retainer to insert tester probes from the wire side
NOTE: lt is not necessary to reinstall the removed
retainer; the terminals will stay locked in the connec
tor housang.
To remove the retainer, insert a flat tip screwdrtver
between connector body and retainer, and carefully
pry out the retainer'
NOTE; Take care not to break the connector'
FLAT TIP
SCREWDRIVER
RETAINER
* Discard after removal.
RETAINER
RETAINER