Honda Civic 1998 Service Manual page 1299

E\
I
v
v
Driver's Window Motor Test
Motol Test:
1. Remove the driver's door panel (see section 20)'
Terminal side ot male terminals
Disconnect the 4P connector from the motor'
Test the motor in each direction by connecting bat-
tery power and ground according to the table.
CAUTION: When the motor stops running' discon-
nect one lead immedistelY.
4.
lf the motor does not run or fails to run smoothly,
replace it.
2 .
3 .
\
Terminal
;;;;--_l\
2
UP
o
@
DOWN
@
o
ly
Pulser Test:
5.
Connect the test leads of an analog ohmmeter to the
No. 3 and No. 4 terminals.
6.
Run the motor by connecting power and ground to
the No. 1 and No. 2 terminals The ohmmeter needle
should move back and forth alternately.
23-201