Honda Civic 1998 Service Manual page 1357

Troubleshooting
Frcm page 24-27
Check th€ wire harness otthe SRS indicator light circuit (2):
1. Turn the ignition switch OFF.
2. Disconnect the SRS main harness 3P connoctor frorn the
main wire harness,
3. Connect a voltmeter between the No. 1 terminal (+) of
the SRS main harness 3P connector and ground.
4. Turn the ignition switch ON (ll), and measure voltage.
ls there 8.5 V or less tor six seconds .tter the ignition
switch has be€n turnod ON llll?
Shori lo powq in the BLU wire of lhe main wirs hrnolis:
Check the wire harnoss ofthe SRS indicator circuit 13)i
'L Turn
the ignition switch OFF.
2. Disconnect the battery nagative cable, then the positive
cable. and wait three minutes.
3. Disconnect the drivor's (and front passenger'sl airbag con-
necto(s) (s6e page 2+11).
4. Disconnect the SRS main harness 18p connector from
the SRS unit.
5. Connect a voltmeler between the No. 6 terminal (+) ol
the SRS main harness 18P connector and ground.
6. Turn the ignition switch ON (ll), and measu.e voltage. There
should be 0.5 V or less.
SRS unit; roplaco tho unit (see paq6 2+
Short to power in the BLU wire of the SRS main harne$:
The SRS Indicator Light Doesn't Come On (cont'dl
SRS MAIN HARNESS
16P CONNECTOR
\
SRS MAIN HARNESS
3P CONNECTOR
c802
SRS MAIN HARNESS 18P CONNECTOR
SRS UN]T
24-28