Honda Civic 1998 Service Manual page 649

Troubleshooting Flowchart - lnhibitor Solenoid
Po$ible Cause
. Disconnected solenoid harn6s3
connectol
. Short or open in inhibitor sol.'
noid wi.e
. F.ultv inhibhor solenoid
SOLENOID HARNESS
8P CONNECTOR
TERMINAL SIDE OF MALE TERMINALS
. OBD ll Scan Tool indicates Code
P1882.
. Self-diagnosis E indicator light
indicates Code 33.
M€asure Inhibitor Solenoid Re3ist'
a n c e a t l h e S o l e n o i d H a r n e s s
Connector:
1. o;sconnect the 8P connector
f r o m t h e s o l e n o i d h a r n e s s
connector.
2 . M e a s u r e t h e
r e s l s t a n c e
between the No. 5 terminal of
the solenoid harness connec_
tor and body ground-
lsthe resistance 11.7 - 21.0 A?
Check Inhibitor Solenoid for a
Short Circuit:
1 . D i s c o n n e c t t h e I ( 2 2 P ) c o n -
nector from the TCM.
2. Check for continuity between
t h e B ' 1 t e r m i n a l a n d b o d y
ground.
Repair 3hort in the wire between
the B1 and the body ground.
Measure lnhibhor Solenoid Resisl'
ance:
1. Connect the 8P connector to
the solenoid harness connec_
IOr.
2 , M e a s u r e t h e
r e s i s t a n c e
b e t w e e n t h e B 1 a n d b o d y
g r o u n d .
ReDair loose terminal or open in
the wire between the Bl and the
solenoid harness connectoa.
ls the resistance 11.7 -21.0{l?
Check tor loose TCM connectors.
lI necessarv, substitute a known-
good TCM and recheck.
TCM CoNNECTOR B l22p)
WIRE S|OE OF FEMALE TERMINALS
14-211