Honda Civic 1998 Service Manual page 1356

T
I
J
v
From page 24-26
(A)
From page 24-26
( B )
DASHBOARD WIBE HARNESS
MAIN WIRE HANNESS
Chock the SRS indicator light circuit:
1. Disconnect the dashboard wire harness 5P connoctor
from the gauge assembly
2. Connect a voltmeter between the No l terminal (+) of
the 5P connector and ground
3. Turn the ignition switch ON (ll). and measure
ls there 8.5 V or lgsi tor six soconds aftor the ignition
switch has beon tumed ON
F ulty SRS indicitor light circuit in th6 gauge a$embly;
r€place the SRS plinted circuit board in the 93uge
Chsck th. wir6 harness ot the SRS indicator light circuit ll l:
1. Turn the ignition switch OFF.
2, Disconnect the main wire harness 24P connector from
the dashboard wire harness
3. Connect a voltmeter between the No 5 terminal {+) of
the main wire harness 24P connector and ground
4. Turn the ignition ON {ll), and measure voltage
ls there 8.5 V or less for six seconds after the ignition
switch has been tumed oN llll?
Short to Dowor in the BLU wire ot the dashboard wire
To page 24-28
DASHBOARD WIRE
HARNESS 2iIP
CONNECTOR
c41 1
(cont'd)
24-27