Honda Civic 1998 Service Manual page 1282

Power Mirrors
Mirror Actuator Replacement (Donnelly Typel
1. Remove the power mirror from the door (see sec-
t,on 20), and disconnect the 8P connector,
2 . R e m o v e t h e m i r r o r b a s e c o v e r f r o m t h e m i r r o r
housing.
MIRROR HOLDER
Remove the mirror holder from the mirror housing.
Gently pull it out by hand.
Remove the three screws from the actuator and the
t w o s c r e w s f r o m t h e b r a c k e t a t t h e b a s e o f t h e
assembly.
5. Remove the bracket from the housino.
MIRROR HOUSING
23-184
\r-
9. Pass the connector boot over the wire harness.
7 .
8 .
6. Remove the two screws, cut the wire harness, and
remove the actuator.
ACTUATOR BRACKET
Record the terminal locations and wire colors.
Route the wire harness of the new actuator through
t h e h o l e i n t h e b r a c k e t . B e s u r e t o p a s s t h e w i r e
under the bracket clip.
BRACKET