Honda Civic 1998 Service Manual page 559

Gountershaft
Disassembly/Reassembly
1. Using a hydraulic press, press out the countershaft
while supporting 4th gear.
NOTE: Place an attachment between the press and
the countershaft to prevent damage to the shaft.
CAUTION: Do not allow the countershaft to fall and
hit the ground when Press€d clear.
14-120
2. Assemble the parts on the countershaft as shown
Delow.
NOTE:
.
Lubricate all pans with ATF during assembly.
.
Before installing the O-rings, wrap the shaft splines
with tape to prevent damaging the O-rings.
4TH GEAR
NEEOLE BEARING
DISTANCE COLLAR, 28 mm
Selective part.
2ND GEAR
THRUST NEEDLE BEARING
3RD GEAR
NEEDLE B€ARING
3RD GEAR COI.LAR
TI{RUST NEEDIE AEABING
SPLINED WASHER
3RD CLUTCH ASSEMBLY