Data Processor Data; Handling Of Stored Data - Konica Minolta CA-410 Series Instruction Manual

Data processor data

1. Handling of stored data

The stored data are the measurement results stored in the data processor.
You can measure a single data using up to 10 probes and 100 Data can be registered.
(1) When Data is selected in the Data list on the [Measurement Data] tab
• When you click the [File Save] button, all the measurement results of the probe used for measurement in the
selected Data are saved.
• Click [Data Delete] to erase all measurement results of the selected Data.
• Click [All Delete] to erase all Data.
(2) When Probe is selected in the Data list on the [Measurement Data] tab
• When you click the [File Save] button, the measurement results of all Data measured with the selected probe are
saved.
• Click [Data Delete] to erase Data on the selected probe.
• When you click [All Delete], all data will be deleted on the screen and in the data processor.
Stored data Log data Select Data or Probe Save file
66
Delete Data Delete all Data