Deleting All Stored Data - Konica Minolta CHROMA METER Instruction Manual

Deleting All Stored Data

You can delete all of the stored measured values by following the procedure below.
(This function is intended for deleting the values stored for [Meas. Result], [Target] or [User
Calibr.].)
Operating Procedure
1.
While the measurement screen is
displayed, press the MENU key.
The setting screen is displayed on the LCD
screen.
2.
Press the RIGHT key or LEFT key to display the [Meas. Result],
[Target] or [User Calibr.] screen.
3.
Press the UP key or DOWN key to
select [Delete All Data].
6
1
90
[Meas. Result]/[Target]/
[User Calibr.] - [Delete All Data]
4, 5
3
2, 5