BraggMONITOR SI User Interface
114
7.2.5
SCPI Interface
This tab allows the user to send Standard Commands for
Programmable Instruments (SCPI) to the equipment.
Please refer to the available command list in section 5
"Remote Communications" on page 51.
Commands are inserted on the command field (number
in Fig. 7.37) and sent by pressing Enter on the keyboard
or the "send cmd" button (number
interrogator's answers appear on the Reply field
(number
1
in Fig. 7.37). Each time new answers are dis
played, older ones are pushed down.
Fig. 7.37
Each time a new command is successfully executed, a
shortcut at the scroll down box is created, as shown in
Fig. 7.38.
A4249-8.0 HBM: public
3
in Fig. 7.37). The
FS22 SI
2