HBM FS22 SI User Manual page 89

BraggMONITOR SI User Interface
Fig. 7.12
Measured values are represented in wavelength shift
(in nm) relative to the central wavelength or engineering
values, according to the formula defined on the Configu­
ration tab (see section "Add, Edit and Delete Sensor(s)"
on page 108). It is possible to obtain absolute values of
temperature, strain, acceleration, etc. However, a sen­
sor configuration must be defined.
Saving Data
To save data, press the "save" button (number 3 in
Fig. 7.8). The data will be saved in the path specified in
the field "Data Folder" on the Configuration tab (see sec­
tion "Data File" on page 109).
The button will change its appearance stating the soft­
ware status (see Fig. 7.13). It will also change its appear­
ance whenever the mouse is on top of the button stating
the action to perform.
To stop recording, uncheck the "saving" button.
Regular Appearance With Mouse on Top
saving not saving saving not saving
Fig. 7.13
FS22 SI 89
A4249-8.0 HBM: public