Remote Communications; Communication Protocol Syntax; Command Syntax - HBM FS22 SI User Manual

5

Remote Communications

FS22 SI
5.1

Communication Protocol Syntax

The interrogator is controlled using standard SCPI syntax
commands.
5.1.1

Command Syntax

Each command is an ASCII string with arguments sepa­
rated by ":" and terminated with the "Line Feed" and
"Carriage Return" characters ("End of Line").
Fig. 5.1
Commands for the Industrial BraggMETER SI are sent
by port 3500. All commands, except for
Continuous Acquisition (see page 64), are received via
the same port. Continuous Acquisition answers are
retrieved via port 3365.
The commands for the FS22 - Industrial BraggMETER SI
have the following correspondence:
A4249-8.0 HBM: public
Remote Communications
51