BraggMONITOR SI User Interface
84
your device. To do so, you should change the "config.ini"
file that is on the Application folder.
► Close the BraggMONITOR application;
► Open and edit the Config.ini file;
► Change the parameter «UseUTC = "1"» to «UseUTC
= "0"» and save the file (Fig. 7.4);
► Run the BraggMONITOR application as an adminis
trator.
Fig. 7.4
The Time definitions on the PC can be checked and/or
configured on the Control Panel under the Date and Time
(Fig. 7.5).
A4249-8.0 HBM: public
FS22 SI