HBM FS22 SI User Manual page 100

BraggMONITOR SI User Interface
SPD Measurement
Method
100
Fig. 7.25
When the Smart Peak Detection method is selected,
besides the "Wavelengths" table, the "Ranges" table is
also presented (number
lower (Min. (nm)) and upper (Max. (nm)) limits of each
sensor range are displayed. These limits can be manu­
ally edited here by the user by clicking on each box to be
edited.
The "Plot Ranges" checkbox (number
be used to activate or deactivate the display of the
ranges limits on the spectral graph.
A4249-8.0 HBM: public
1 in Fig. 7.26), in which the
2 in Fig. 7.26) can
FS22 SI