Table of Contents
Advertisement
BraggMONITOR SI User Interface
7.2.2
Numerical View
The Numerical View tab shows the acquired measure
ments for each sensor, organized by optical channel as
shown in Fig. 7.23. For each channel there are two col
umns, one with the name of the sensors and another with
wavelength shift (in nm) relative to the central wave
length or engineering values (units defined by the sensor
Formula in Configuration tab) (number
1
in Fig. 7.23).
Next to the channel identifier, the number of sensors
detected in that channel is stated (number
2
in Fig. 7.23).
Fig. 7.23
FS22 SI
97
A4249-8.0 HBM: public
Advertisement
Table of Contents
