Operation
3.4
Switching OFF
To avoid accidental shut-down of the interrogator, it is
necessary to press the "ON/OFF" button between 2 and
6 seconds (Fig. 3.3).
If for some reason the 6 seconds are exceeded the user
can release the button before 10 seconds are reached
and the interrogator will remain ON (Fig. 3.4).
WARNING
If the ON/OFF button is pressed more than 10 seconds
irreversible changes on the interrogator configuration are
performed.
POWER LED
blinking at 1 Hz
Fig. 3.3
POWER LED
POWER LED
blinking at 1 Hz
ON
Fig. 3.4
FS22 SI
19
A4249-8.0 HBM: public