HBM FS22 SI User Manual page 33

3 Continuous
acquisition
4 Scheduled
acquisition
FS22 SI
:ACQUisition:OSATrace:CHANnel:C?
The FS22 - Industrial BraggMETER SI interrogator
returns to the ready state through the :ACQUisi­
tion:STOP command.
The FS22 - Industrial BraggMETER SI interrogator runs
in the continuous acquisition state after receiving the
commands:
:ACQUisition:OSATrace:CONTinuous:STARt
:ACQUisition:WAVElength:CONTinuous:STARt
:ACQUisition:SAVE:CONTinuous:STARt
:ACQUisition:ENGIneering:CONTinuous:STARt
:ACQUisition:WAVElength:CONTinuous:NTP­
Sync:STARt
:ACQUisition:ENGIneering:CONTinuous:NTP­
Sync:STARt
The continuous acquisition start commands can only be
executed in the ready state.
In this operational state the FS22 - Industrial
BraggMETER SI interrogator only replies to the com­
mands:
:ACQUisition:STOP
:IDENtification?
:STATus?
After receiving the :ACQUisition:STOP command the
FS22 - Industrial BraggMETER SI interrogator returns to
the ready state.
The FS22 - Industrial BraggMETER SI interrogator runs
in the scheduled acquisition state after receiving the
command:
A4249-8.0 HBM: public
Operation
33