Configuration - HBM FS22 SI User Manual

BraggMONITOR SI User Interface
7.2.4

Configuration

Acquisition configuration allows one to perform sensors
configuration. To accomplish this step correctly, sensors'
calibration sheets might be needed.
Fig. 7.31
Clear configuration
If an old configuration is set, it is possible to clear it and
start a new configuration pressing button "new" (num­
ber 11 in Fig. 7.31). Be aware this operation will discard
all previous configurations of all channels.
FS22 SI 107
A4249-8.0 HBM: public