Date And Time - HBM FS22 SI User Manual

FS22 SI
On the left, general information is presented
(see Fig. 7.2):
S On the first line interrogator configured date and time
is presented.
S The second line is destined for the connection status
to the interrogator.
S The last and third line is destined to inform the user
on the current status of the interrogator and error
messages. For attention, error messages are shown
in orange (see Fig. 7.3).
Fig. 7.2 Current status information
Fig. 7.3 Error message
7.1.1

Date and Time

The BraggMONITOR SI Software uses by default the
UTC defined time on the PC that it is operating with. The
BraggMONITOR updates the interrogator date and time
settings when it connects to the device. Data, either by
using the BraggMONITOR or the internal memory of the
interrogator, will be saved with this time stamp.
It is possible to change the BraggMONITOR SI Software
time reference from UTC to the defined Local Time on
A4249-8.0 HBM: public
BraggMONITOR SI User Interface
83