HBM FS22 SI User Manual page 10

Technical Details
Stand by
Sleep mode
1)
As per NIST Technical Note 1297: Repeatability [§D.1.1.2], σ of measurements carried out under
the same conditions; Reproducibility [§D.1.1.3], σ of measurements carried out under the full
operation conditions (temperature and power cycles). Above mentioned measurements accuracy
[§D.1.1.1] carried out using calibrated instrument against a NIST traceable gas cell. Further details
on HBM FiberSensing technical notes
2)
With simultaneous acquisition
3)
Considered as the ratio between the optical power emitted at an optical channel and the minimum
detectable optical power reflected by a fiber Bragg grating
4)
Typical values
5)
Different plug formats can be added upon request
6)
Standard Commands for Programmable Instruments
7)
Full spectrum trace with 20001 points acquired over the 100 nm range (sampled every 5 pm)
8)
Up to 6000 hours of data storage, considering 100 sensors
9)
Sinusoidal vibration
10)
Peak consumption may reach 38 W (during startup)
10
0.4 W
0.4 W
A4249-8.0 HBM: public
FS22 SI