HBM FS22 SI User Manual page 109

Formula
FS22 SI
Function defining the correlation between the wavelength
shift (Δλ=x) and the engineering values. Here it is possible to
set a formula manually, although it is also possible to copy
and paste from other locations. If the desired output is wave­
length shift, insert x on formula text box.
The wavelength shift (Δλ=x) is calculated as the difference
between the measured value at each sweep and the central
wavelength (λ ) defined for that peak.
0
Do
-11.3
-11.3*x
-11.3*x^2+105.4*x+30
Tab. 7.1
Test configuration
Test Configuration (number
user to check the current values from each sensor
according to its configuration. Measured values will be
displayed on the central wavelength field, in accordance
to the defined formula for the sensor.
Information
Error code -998 will be displayed when no sensor is
found within a range.
Data File Definition: Path and Length
As referred on section "Saved Data Files" on page 90,
data sets are named automatically.
The path for file saving and the maximum duration of
each file can be defined under the Configuration Tab.
A4249-8.0 HBM: public
BraggMONITOR SI User Interface
Do not
-11,3
-11.3x
=-11.3*x^2+105.4*x+30
3 in Fig. 7.31) allows the
109