Conventional
Measurement
Method
SPD Measurement
Method
FS22 SI
The header of the file indicates whether it contains infor
mation of a configuration with ranges OFF
([RANGES;OFF] - Fig. 7.32) or with ranges ON
([RANGES;ON] - Fig. 7.33).
For the case of a configuration without ranges, only the
Name (number
1
(nm) (number
2
edited in Notepad or Excel (see "Opening Data in Micro
soft Excel" section on page 91) and saved as .txt exten
sion file after editing.
In the case of a configuration with ranges ON, for each
channel there are 5 columns: Name (number
Fig. 7.33), Central wavelength(nm) (number
Fig. 7.33), Range Min. Value (nm) (number
Fig. 7.33), Range Max. Value (nm) (number
Fig. 7.33), and Formula (number
Configuration file can always be loaded by the user by
pressing the Load button (number
selecting the file containing the desired configuration
(see Fig. 7.34).
Fig. 7.34
A4249-8.0 HBM: public
BraggMONITOR SI User Interface
in Fig. 7.33) and Central wavelength
in Fig. 7.33) are stored. This file might be
1
in
2
in
3
in
4
in
5
in Fig. 7.33).
8
in Fig. 7.31) and
111