HBM FS22 SI User Manual page 90

BraggMONITOR SI User Interface
Saved Data Files
90
Saved data file collects the data between the instant the
save button is pressed and the instant it is pressed back.
Data sets will be recorded in .txt files automatically
named, as follows:
BraggMONITOR SI Data [YYYY.MM.DD.HH.MM.SS ;
YYYY.MM.DD.HH.MM.SS].txt.
The YYYY.MM.DD.HH.MM.SS parts of the filename rep­
resent the start and finish, respectively, of the period dur­
ing which the data has been saved.
Data is organized in columns (see Fig. 7.15). The first
row is a header indicating how many samples were
acquired per second. The second row is a header con­
taining the labels of each column:
Fig. 7.14
st
1 1 column – UTC or Local Date (according to what is
configured) with format «DD-MM-YYYY»
nd
2 2 column – UTC or Local Time with format
«HH:MM:SS »
rd
3 3 column – Sample number
4 Following columns – Sensor name (Central wave­
length (nm); formula) - ordered by optical channel and
then by wavelength. The values along these columns
represent either wavelengths (in nm) or engineering
values (units in accordance with Formula from Config­
uration tab) of the corresponding sensors.
A4249-8.0 HBM: public
FS22 SI