BraggMONITOR SI Software Details
76
6.2
Install and Uninstall Software
6.2.1
System Requirements
To operate the current version of BraggMONITOR, your
PC must have the following requirements:
S Intel Pentium or equivalent processor upwards from
1 GHz
S Windows® XP (32 Bit and 64 Bit versions), Windows
Vista® (32 Bit and 64 Bit versions), Windows® 7 (32
Bit and 64 Bit versions, Home, Professional or Ulti
mate editions) or Windows® 8/8.1 (32 Bit and 64 Bit
versions) or Windows° 10 (32 Bit and 64 Bit versions)
S Main memory (RAM):
- at least 512 Mbyte for Windows® XP
- at least 1,024 Mbyte for Windows Vista®
- at least 2,048 Mbyte for Windows®7 or higher
S Graphics card (and screen) with a resolution of
1,024 x 768 pixel or higher
S Approx. 1 Gbyte of free storage capacity for the pro
gram installation; at least a further 1 Gbyte is needed
for the temporary storage of data; however you can
also use a different drive for this.
S Ethernet interface (100/1000 MBit)
The above requirements are sufficient if you use low
sample rates and some sensors. You must use a more
powerful PC if you wish to use a large number of sensors
with high sample rates.
A4249-8.0 HBM: public
FS22 SI