Festo CPX-FB32 Manual page 61

2. Commissioning
Festo P.BE-CPX-FB32-EN en 1111a
Fig. 2/6: CPX-FB32 – adding as generic module
3. Enter in the window "Module Properties" (Fig. 2/7):
– the name for the fieldbus node (freely selectable)
– Instances for inputs: 101
outputs: 100
– Instance for Configuration Assembly: 102
The standard setting is "0"
(Configuration Assembly not used).
Operating mode Remote I/O: If you undertake
parameterisation via the Configuration Assembly:
Enter the total of the assigned bytes
(see section 2.3.1).
Operating mode Remote Controller:
Leave the standard setting "0" unchanged.
– Data format SINT
– IP address
Confirm the entry.
2-27