Festo CPX-FB32 Manual page 109

B. Ethernet/IP Objects of the CPX-FB32
Obj. Instances
(= Module no. + 1)
133 1 ... 48
104 1 ... 48
106 1 ... 48
102 1 ... 48
Festo P.BE-CPX-FB32-EN en 1111a
Remote I/O operating mode
Each data range begins on the LSB (least significant bit) of a
word.
Instance 101: Input
Within the instance "Input Assembly Object" all inputs of the
CPX system are transmitted cyclically over the network by
means of a communication connection.
The following sequence applies during transmission:
Sequence of transmission
1. I/O diagnostic interface, if active (16-bit orientated)
2. Object instances of the analogue channels (16-bit orientated)
3. Instances of the technology modules (16 or 8-bit orientated)
4. Object instances of the digital inputs (8-bit orientated)
Instance 101 (input) possesses the following member list in
the operating mode Remote I/O:
Attributes Entries in member list
(channel)
0/1 I/O diagnostic interface data,
if active
1 ... 32 Analogue channel data
1 ... 64 / Technology module
65 ... 96
1 ... 64 Digital Data
Type
WORD
WORD
BYTE/
WORD
BOOL
B-11